Paper Title :Development and Optimization of Design Structures of the Machine for 3D Distance Fabrics Production
Author :Karel Raz, Petr Karel
Article Citation :Karel Raz ,Petr Karel ,
(2023 ) " Development and Optimization of Design Structures of the Machine for 3D Distance Fabrics Production " ,
International Journal of Advances in Science, Engineering and Technology(IJASEAT) ,
pp. 153-156,
Volume-11,Issue-1
Abstract : This article deals with a research in the field of production technology of 3D distance fabrics, which are structural
elements of inflatable products, paddleboards, mattresses, walls of inflatable halls and emergency equipment. The technology
is described in this paper. The aim of the work is the structural design development of new structural units and optimization of
existing structural units of the production machine for the 3D distance fabrics (called DIFA2). These segments are the sewing
units (new part of machine) and the distance mechanism with the pulling bar (existing part of machine). Modern simulation
tools were chosen for the calculation and the frequency responses of the machine to the excitation forces were analyzed. To
validate the calculations, a comparison was made with measurements on the machine. The stress and deformation response of
the machine is analyzed as part of the calculations. Special emphasis is placed on minimizing machine deformation. This is
important due to operation and accuracy. Oscillation analysis in the form of modal analysis was carried out in order to describe
the behavior of the machine in operation. The result of the research is a suitable design procedure that can also be transferred
to other applications.
Keywords - 3D Distance Fabrics, Design, Finite Element Method, Structure, Weaving Machine.
Type : Research paper
Published : Volume-11,Issue-1
DOIONLINE NO - IJASEAT-IRAJ-DOIONLINE-19592
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 43 |
| |
Published on 2023-06-10 |
|