Effect Of Thickness Of Woven Bamboo Wall On Thermal Conductivity Coefficient And Bulk Density
The objective of this study is aimed to investigate experimentally an influence of thickness of woven bamboo
wall on thermal conductivity coefficient and bulk density. The woven bamboo wall used as a tested sample in this study is a
commercial product which differs in thickness: 3 mm, 4 mm, 6 mm and 8 mm. In practice, there are two main experiments
separate from each other to measure the coefficient of thermal conductivity and the bulk density. First, in order to determine
the thermal conductivity coefficient, woven bamboo samples were tested under the framework of ASTM C177 standard. The
specimen sizes are 30x30 cm2. The experimental operated by AC 220 Volt with 100 Watt at 57 oc for more than 3 Hours to
achieve a steady state condition. Second, ASTM D2395-93 method B was applied to evaluate a total volume of samples.
Specimen sizes are 3x10 cm2 wrapped with thin plastic wrap. Then thin stick was used to push the specimen down the water
level. The result showed that the bulk density and the thermal conductivity coefficient of woven bamboo wall increased with
the thickness. In addition, the thermal conductivity coefficient increases when the bulk density increased. The coefficient of
thermal conductivity of 3mm thick woven bamboo wall is 1.55 W/m-K, which is the better thermal insulation compared to
the other thickness.
Index Terms— Thermal Conductivity, Bulk Density, Woven Bamboo, Thermal Insulation.