Paper Title :Influence of Misalignment and Backlash on Spur Gear Using FEM
Author :Nouby M. Ghazaly, Ali A. Kamel, M.O.Mousa
Article Citation :Nouby M. Ghazaly ,Ali A. Kamel ,M.O.Mousa ,
(2014 ) " Influence of Misalignment and Backlash on Spur Gear Using FEM " ,
International Journal of Mechanical and Production Engineering (IJMPE) ,
pp. 66-69,
Volume-2,Issue-12
Abstract : The main objective of this work is to investigate the influence of shaft misalignment and backlash on the stress
generated on the spur gear. Finite element analysis using ABAQUS software is used to determine the stresses and deflections
on gear tooth. Three-dimensional finite element model of pinion gear engaged with a solid gear is created. The material is
considered homogenous and isotropic with a linear elastic behavior. The gear pair contact position is chosen to determine
contact stress assuming small sliding and dry friction contact. Appropriate loading and boundary conditions are considered.
Based on the simulation, the influence of different values of misalignment angle and backlash on equivalent stress is
examined. It is observed that the highest misalignment angle resulted in the highest generated tooth stresses. Moreover, it
can be concluded that the results of this research should be helpful in the design and manufacture of spur gears.
Keywords- Finite Element Method, Stress Analysis, Misalignment, Backlash.
Type : Research paper
Published : Volume-2,Issue-12
DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-1569
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 81 |
| |
Published on 2014-12-03 |
|