International Journal of Mechanical and Production Engineering (IJMPE)
Follow Us On :
current issues
Volume-11,Issue-11  ( Nov, 2023 )
Past issues
  1. Volume-11,Issue-10  ( Oct, 2023 )
  2. Volume-11,Issue-9  ( Sep, 2023 )
  3. Volume-11,Issue-8  ( Aug, 2023 )
  4. Volume-11,Issue-7  ( Jul, 2023 )
  5. Volume-11,Issue-6  ( Jun, 2023 )
  6. Volume-11,Issue-5  ( May, 2023 )
  7. Volume-11,Issue-4  ( Apr, 2023 )
  8. Volume-11,Issue-3  ( Mar, 2023 )
  9. Volume-11,Issue-2  ( Feb, 2023 )
  10. Volume-11,Issue-1  ( Jan, 2023 )

Statistics report
Feb. 2024
Submitted Papers : 80
Accepted Papers : 10
Rejected Papers : 70
Acc. Perc : 12%
Issue Published : 128
Paper Published : 2371
No. of Authors : 6757
  Journal Paper

Paper Title :
Effect of Solution Treatment on High Temperature Creep Behavior of Incoloy 800h

Author :Esah Hamzah, Maureen Mudang, Muhammad Adil Khattak

Article Citation :Esah Hamzah ,Maureen Mudang ,Muhammad Adil Khattak , (2016 ) " Effect of Solution Treatment on High Temperature Creep Behavior of Incoloy 800h " , International Journal of Mechanical and Production Engineering (IJMPE) , pp. 41-46, Volume-4,Issue-8

Abstract : Incoloy alloy 800H is solution strengthened Iron-Nickel-Chromium (Fe-Ni-Cr) superalloy with good strength and excellent resistance to oxidation and carburization for high temperature applications such as nuclear reactors, gas turbines and heat-treating industries. Hence, high temperature creep property becomes an important aspect to be considered during material selection for such applications. The primary objective of this paper is to study the effect of microstructural variation of Incoloy 800H on the high temperature creep properties. The materials were heat treated at temperature 900°C, 1050°C, 1150°C and 1200°C for 3 hours and followed by water quench. The grain sizes varied from 94.28 to 380.95 μm after the solution treatment at various temperatures. High temperature creep tests were performed on the heat-treated samples at temperature 800°C with constant stress of 100 MPa. The creep curves results show primary, secondary and tertiary stages. The 800H alloy shows an increase in steady state creep rate with increase in grain size of the solution treated sample. The samples after creep tests were analyzed using optical microscope, scanning electron microscope (SEM), energy dispersive spectrometer (EDS) and transmission electron microscope (TEM). Recrystallizations of the grains were also observed near the fracture surface and it was also found that the samples failed in ductile mode with cavitation at the grain boundaries. Keywords- Incoloy 800H, High Temperature Creep, Superalloy.

Type : Research paper

Published : Volume-4,Issue-8


Copyright: © Institute of Research and Journals

| PDF |
Viewed - 63
| Published on 2016-09-14
IRAJ Other Journals
IJMPE updates
Volume-11,Issue-10 (Oct, 2023 )
The Conference World