Paper Title :Finite Element Analysis For Strength of an Agriculture Truck Pick-Up: Comparison Between Beam and Solid Element
Author :Jakkree Wichairahad, Poonyapat Thablakhorn, Nattawut Tonglor
Article Citation :Jakkree Wichairahad ,Poonyapat Thablakhorn ,Nattawut Tonglor ,
(2016 ) " Finite Element Analysis For Strength of an Agriculture Truck Pick-Up: Comparison Between Beam and Solid Element " ,
International Journal of Mechanical and Production Engineering (IJMPE) ,
pp. 147-150,
Volume-4,Issue-8
Abstract : The objective of this research was to compare the structural strength results of agriculture truck pick-up based
on basic global load case using finite element analysis (FEA.) software. The pick-up of an agriculture truck made from Anan
Karn Chang Agriculture Truck in Chatturat district, Chaiyaphum province, Thailand, was chosen for the study. The two
element type, three-dimensional beam element and solid element were applied in the study for compared of FEA result. The
analysis was simplified based on static load and linear elastic homogeneous material behavior assumption. There are three
types of basic load behavior consisted of bending, longitudinal, and lateral loads considered. The results of maximum stress
and deformations including construction stiffness were used as main parameters to evaluate the structural strength among
load case. Regarding the results, for three-dimensional beam element it was found that the maximum stress occurred in
longitudinal load was 208.96 MPa. The stress of bending load and lateral load was 197.60 MPa and 125.18 MPa,
respectively. The bending stiffness of pick-up was 8,354 N/mm., for three-dimensional solid element it was found that the
maximum stress occurred in longitudinal load was 210.04 MPa. The stress of bending load and lateral load was 184.05 MPa
and 125.53 MPa, respectively. Furthermore, the bending stiffness of pick-up was 13,962 N/mm. However, the safety factor
of two analyzed case were more than 1.5.
Keywords— Agriculture Truck, Pick-up, Structural Strength Analysis, Finite Element Analysis.
Type : Research paper
Published : Volume-4,Issue-8
DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-5517
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 75 |
| |
Published on 2016-09-26 |
|