Paper Title :The Optimization of Process Parameters for Laser Welded Galvanized Automobile Steel Sheets using a Taguchi Method
Author :Celalettin Yuce, Fatih Karpat, Nurettin Yavuz, Gokhan Tekin,Necdet Capar
Article Citation :Celalettin Yuce ,Fatih Karpat ,Nurettin Yavuz ,Gokhan Tekin ,Necdet Capar ,
(2017 ) " The Optimization of Process Parameters for Laser Welded Galvanized Automobile Steel Sheets using a Taguchi Method " ,
International Journal of Mechanical and Production Engineering (IJMPE) ,
pp. 83-87,
Volume-5,Issue-9
Abstract : The aim of the study is to optimize the welding parameters for laser welded thin galvanized steel sheets using a
Taguchi orthogonal array. The welding parameters such as laser power, welding speed and focal point position were
determined and the optimum parameter combination for the maximum tensile load of the joints were predicted. Additionally,
examination of the weld cross-sections, microhardness tests and fracture zone of the selected welded joints were conducted
to understand the better performance of the joints. The optimum levels of the laser power, welding speed and focal position
were found to be 3000 W, 100 mm/s and 0 mm, respectively.
Keywords- Laser Overlap Welding, Galvanized Steel, Parameter Optimization, Tensile Test
Type : Research paper
Published : Volume-5,Issue-9
DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-9269
View Here
Copyright: © Institute of Research and Journals
| |
 |
| |
 |
PDF |
| |
Viewed - 89 |
| |
Published on 2017-11-23 |
|
